Skip to content
crewcalcs
Structural · W — wide-flange

W8x24 Steel Beam — Dimensions & Properties

W8x24 weighs 24 lb/ft and is about 7.93 in deep. Below: the full AISC section properties, a scaled cross-section, and a pre-filled weight calculator.

Weight
24lb/ft
Depth
7.93in
Width
6.495in
Area
7.08in²
Shape
W8X24 · W — wide-flange

Enter feet + inches, e.g. 20' or 18' 6".

= 20' (240″)
pcs
Cost estimate (optional)
$/lb

Optional. Prices are volatile — use your current mill/supplier rate.

Total weight
1 × W8X24
480lb
Per piece
480lb
Pieces
1
Total
480lb
Tons
0.24t
d7.93"bf 6.495"tw 0.245
ƒShow the math
  1. 1.Weight per foot (from AISC)per AISC Shapes Database v16.0

    W8X24 is a listed shape; its nominal weight is a published property.

    = 24 lb/ft
  2. 2.Length in feet
    length (in) ÷ 12
    240 ÷ 12
    = 20 ft
  3. 3.Weight per piece
    weight per foot × length
    24 × 20
    = 480 lb
  4. 4.Total weight
    weight per piece × quantity
    480 × 1
    = 480 lb
  5. 5.Convert to tons
    total lb ÷ 2000
    480 ÷ 2000
    = 0.24 tons

Section properties

Geometry
Weight
24lb/ft
Area, A
7.08in²
Depth, d
7.93in
Flange width, bf
6.495in
Flange thick, tf
0.4in
Web thick, tw
0.245in
Strong axis (x-x)
Ix
82.7in⁴
Sx
20.9in³
Zx
23.1in³
rx
3.42in
Weak axis (y-y)
Iy
18.3in⁴
Sy
5.63in³
Zy
8.57in³
ry
1.61in
Torsion & warping
J
0.346in⁴
Cw
259in⁶
Before you rely on this
  • Listed weight is the AISC theoretical (nominal) weight per foot. Actual mill weight varies within ASTM rolling tolerance, roughly ±2.5%.
  • This is bare member steel only. Add plates, stiffeners, connections, bolts, and coatings for a full erected-steel takeoff.

Similar shapes

Same series and nearest depths — compare weight and section modulus when you are sizing.

W8x10 10 lb/ftW8x13 13 lb/ftW8x18 18 lb/ftW8x31 31 lb/ftW8x40 40 lb/ftW8x48 48 lb/ftW8x67 67 lb/ftW10x33 33 lb/ftW10x12 12 lb/ftW10x49 49 lb/ft

W8x24 — questions

How much does a W8x24 weigh per foot?
A W8x24 weighs 24 lb/ft. Over a 20-foot length that is 480 lb (0.24 tons); a 30-foot length is 720 lb.
What are the dimensions of a W8x24?
W8x24 has an actual depth of 7.93 in and a flange width of 6.495 in, a flange thickness of 0.4 in, and a web thickness of 0.245 in. Cross-sectional area is 7.08 in².
What is the moment of inertia and section modulus of a W8x24?
About its strong axis, W8x24 has a moment of inertia Ix of 82.7 in⁴ and a section modulus Sx of 20.9 in³, with a plastic section modulus Zx of 23.1 in³. Use these with your engineer's design values — they are geometric properties, not an allowable load.
What does W8x24 mean?
The W means wide-flange. The first number is the nominal depth in inches and the second is the weight in pounds per foot — so W8x24 is a nominally 8-inch-deep wide-flange beam weighing 24 lb/ft (actual depth 7.93 in).

Related tools

Structural
Steel Beam Weight Calculator

Weigh any shape and length, with tons and cost.

Structural
Historic Steel Beam Identifier

Match a measured beam to a shape by weighted distance.

Sources & references

Estimates for planning purposes only. Verify all results against the code edition adopted in your jurisdiction and with your Authority Having Jurisdiction (AHJ). This tool is not a substitute for a licensed professional engineer. See our methodology, sources, and code editions.

Data: AISC Shapes Database v16.0, © AISC — used per its developer-use provision.