Skip to content
crewcalcs
Structural · W — wide-flange

W10x33 Steel Beam — Dimensions & Properties

W10x33 weighs 33 lb/ft and is about 9.73 in deep. Below: the full AISC section properties, a scaled cross-section, and a pre-filled weight calculator.

Weight
33lb/ft
Depth
9.73in
Width
7.96in
Area
9.71in²
Shape
W10X33 · W — wide-flange

Enter feet + inches, e.g. 20' or 18' 6".

= 20' (240″)
pcs
Cost estimate (optional)
$/lb

Optional. Prices are volatile — use your current mill/supplier rate.

Total weight
1 × W10X33
660lb
Per piece
660lb
Pieces
1
Total
660lb
Tons
0.33t
d9.73"bf 7.96"tw 0.29
ƒShow the math
  1. 1.Weight per foot (from AISC)per AISC Shapes Database v16.0

    W10X33 is a listed shape; its nominal weight is a published property.

    = 33 lb/ft
  2. 2.Length in feet
    length (in) ÷ 12
    240 ÷ 12
    = 20 ft
  3. 3.Weight per piece
    weight per foot × length
    33 × 20
    = 660 lb
  4. 4.Total weight
    weight per piece × quantity
    660 × 1
    = 660 lb
  5. 5.Convert to tons
    total lb ÷ 2000
    660 ÷ 2000
    = 0.33 tons

Section properties

Geometry
Weight
33lb/ft
Area, A
9.71in²
Depth, d
9.73in
Flange width, bf
7.96in
Flange thick, tf
0.435in
Web thick, tw
0.29in
Strong axis (x-x)
Ix
171in⁴
Sx
35in³
Zx
38.8in³
rx
4.19in
Weak axis (y-y)
Iy
36.6in⁴
Sy
9.2in³
Zy
14in³
ry
1.94in
Torsion & warping
J
0.583in⁴
Cw
791in⁶
Before you rely on this
  • Listed weight is the AISC theoretical (nominal) weight per foot. Actual mill weight varies within ASTM rolling tolerance, roughly ±2.5%.
  • This is bare member steel only. Add plates, stiffeners, connections, bolts, and coatings for a full erected-steel takeoff.

Similar shapes

Same series and nearest depths — compare weight and section modulus when you are sizing.

W10x12 12 lb/ftW10x15 15 lb/ftW10x22 22 lb/ftW10x26 26 lb/ftW10x30 30 lb/ftW10x49 49 lb/ftW10x68 68 lb/ftW10x100 100 lb/ftW8x67 67 lb/ftW8x48 48 lb/ft

W10x33 — questions

How much does a W10x33 weigh per foot?
A W10x33 weighs 33 lb/ft. Over a 20-foot length that is 660 lb (0.33 tons); a 30-foot length is 990 lb.
What are the dimensions of a W10x33?
W10x33 has an actual depth of 9.73 in and a flange width of 7.96 in, a flange thickness of 0.435 in, and a web thickness of 0.29 in. Cross-sectional area is 9.71 in².
What is the moment of inertia and section modulus of a W10x33?
About its strong axis, W10x33 has a moment of inertia Ix of 171 in⁴ and a section modulus Sx of 35 in³, with a plastic section modulus Zx of 38.8 in³. Use these with your engineer's design values — they are geometric properties, not an allowable load.
What does W10x33 mean?
The W means wide-flange. The first number is the nominal depth in inches and the second is the weight in pounds per foot — so W10x33 is a nominally 10-inch-deep wide-flange beam weighing 33 lb/ft (actual depth 9.73 in).

Related tools

Structural
Steel Beam Weight Calculator

Weigh any shape and length, with tons and cost.

Structural
Historic Steel Beam Identifier

Match a measured beam to a shape by weighted distance.

Sources & references

Estimates for planning purposes only. Verify all results against the code edition adopted in your jurisdiction and with your Authority Having Jurisdiction (AHJ). This tool is not a substitute for a licensed professional engineer. See our methodology, sources, and code editions.

Data: AISC Shapes Database v16.0, © AISC — used per its developer-use provision.