Skip to content
crewcalcs
Structural · W — wide-flange

W21x62 Steel Beam — Dimensions & Properties

W21x62 weighs 62 lb/ft and is about 20.99 in deep. Below: the full AISC section properties, a scaled cross-section, and a pre-filled weight calculator.

Weight
62lb/ft
Depth
20.99in
Width
8.24in
Area
18.3in²
Shape
W21X62 · W — wide-flange

Enter feet + inches, e.g. 20' or 18' 6".

= 20' (240″)
pcs
Cost estimate (optional)
$/lb

Optional. Prices are volatile — use your current mill/supplier rate.

Total weight
1 × W21X62
1,240lb
Per piece
1240lb
Pieces
1
Total
1240lb
Tons
0.62t
d20.99"bf 8.24"tw 0.4
ƒShow the math
  1. 1.Weight per foot (from AISC)per AISC Shapes Database v16.0

    W21X62 is a listed shape; its nominal weight is a published property.

    = 62 lb/ft
  2. 2.Length in feet
    length (in) ÷ 12
    240 ÷ 12
    = 20 ft
  3. 3.Weight per piece
    weight per foot × length
    62 × 20
    = 1240 lb
  4. 4.Total weight
    weight per piece × quantity
    1240 × 1
    = 1240 lb
  5. 5.Convert to tons
    total lb ÷ 2000
    1240 ÷ 2000
    = 0.62 tons

Section properties

Geometry
Weight
62lb/ft
Area, A
18.3in²
Depth, d
20.99in
Flange width, bf
8.24in
Flange thick, tf
0.615in
Web thick, tw
0.4in
Strong axis (x-x)
Ix
1,330in⁴
Sx
127in³
Zx
144in³
rx
8.54in
Weak axis (y-y)
Iy
57.5in⁴
Sy
13.9in³
Zy
21.7in³
ry
1.77in
Torsion & warping
J
1.83in⁴
Cw
5,960in⁶
Before you rely on this
  • Listed weight is the AISC theoretical (nominal) weight per foot. Actual mill weight varies within ASTM rolling tolerance, roughly ±2.5%.
  • This is bare member steel only. Add plates, stiffeners, connections, bolts, and coatings for a full erected-steel takeoff.

Similar shapes

Same series and nearest depths — compare weight and section modulus when you are sizing.

W21x44 44 lb/ftW21x50 50 lb/ftW21x57 57 lb/ftW21x68 68 lb/ftW21x83 83 lb/ftW21x93 93 lb/ftW21x101 101 lb/ftW21x122 122 lb/ftW18x97 97 lb/ftW24x55 55 lb/ft

W21x62 — questions

How much does a W21x62 weigh per foot?
A W21x62 weighs 62 lb/ft. Over a 20-foot length that is 1,240 lb (0.62 tons); a 30-foot length is 1,860 lb.
What are the dimensions of a W21x62?
W21x62 has an actual depth of 20.99 in and a flange width of 8.24 in, a flange thickness of 0.615 in, and a web thickness of 0.4 in. Cross-sectional area is 18.3 in².
What is the moment of inertia and section modulus of a W21x62?
About its strong axis, W21x62 has a moment of inertia Ix of 1,330 in⁴ and a section modulus Sx of 127 in³, with a plastic section modulus Zx of 144 in³. Use these with your engineer's design values — they are geometric properties, not an allowable load.
What does W21x62 mean?
The W means wide-flange. The first number is the nominal depth in inches and the second is the weight in pounds per foot — so W21x62 is a nominally 21-inch-deep wide-flange beam weighing 62 lb/ft (actual depth 20.99 in).

Related tools

Structural
Steel Beam Weight Calculator

Weigh any shape and length, with tons and cost.

Structural
Historic Steel Beam Identifier

Match a measured beam to a shape by weighted distance.

Sources & references

Estimates for planning purposes only. Verify all results against the code edition adopted in your jurisdiction and with your Authority Having Jurisdiction (AHJ). This tool is not a substitute for a licensed professional engineer. See our methodology, sources, and code editions.

Data: AISC Shapes Database v16.0, © AISC — used per its developer-use provision.