Skip to content
crewcalcs
Structural · W — wide-flange

W21x101 Steel Beam — Dimensions & Properties

W21x101 weighs 101 lb/ft and is about 21.36 in deep. Below: the full AISC section properties, a scaled cross-section, and a pre-filled weight calculator.

Weight
101lb/ft
Depth
21.36in
Width
12.29in
Area
29.8in²
Shape
W21X101 · W — wide-flange

Enter feet + inches, e.g. 20' or 18' 6".

= 20' (240″)
pcs
Cost estimate (optional)
$/lb

Optional. Prices are volatile — use your current mill/supplier rate.

Total weight
1 × W21X101
2,020lb
Per piece
2020lb
Pieces
1
Total
2020lb
Tons
1.01t
d21.36"bf 12.29"tw 0.5
ƒShow the math
  1. 1.Weight per foot (from AISC)per AISC Shapes Database v16.0

    W21X101 is a listed shape; its nominal weight is a published property.

    = 101 lb/ft
  2. 2.Length in feet
    length (in) ÷ 12
    240 ÷ 12
    = 20 ft
  3. 3.Weight per piece
    weight per foot × length
    101 × 20
    = 2020 lb
  4. 4.Total weight
    weight per piece × quantity
    2020 × 1
    = 2020 lb
  5. 5.Convert to tons
    total lb ÷ 2000
    2020 ÷ 2000
    = 1.01 tons

Section properties

Geometry
Weight
101lb/ft
Area, A
29.8in²
Depth, d
21.36in
Flange width, bf
12.29in
Flange thick, tf
0.8in
Web thick, tw
0.5in
Strong axis (x-x)
Ix
2,420in⁴
Sx
227in³
Zx
253in³
rx
9.02in
Weak axis (y-y)
Iy
248in⁴
Sy
40.3in³
Zy
61.7in³
ry
2.89in
Torsion & warping
J
5.21in⁴
Cw
26,200in⁶
Before you rely on this
  • Listed weight is the AISC theoretical (nominal) weight per foot. Actual mill weight varies within ASTM rolling tolerance, roughly ±2.5%.
  • This is bare member steel only. Add plates, stiffeners, connections, bolts, and coatings for a full erected-steel takeoff.

Similar shapes

Same series and nearest depths — compare weight and section modulus when you are sizing.

W21x44 44 lb/ftW21x50 50 lb/ftW21x57 57 lb/ftW21x62 62 lb/ftW21x68 68 lb/ftW21x83 83 lb/ftW21x93 93 lb/ftW21x122 122 lb/ftW24x55 55 lb/ftW24x68 68 lb/ft

W21x101 — questions

How much does a W21x101 weigh per foot?
A W21x101 weighs 101 lb/ft. Over a 20-foot length that is 2,020 lb (1.01 tons); a 30-foot length is 3,030 lb.
What are the dimensions of a W21x101?
W21x101 has an actual depth of 21.36 in and a flange width of 12.29 in, a flange thickness of 0.8 in, and a web thickness of 0.5 in. Cross-sectional area is 29.8 in².
What is the moment of inertia and section modulus of a W21x101?
About its strong axis, W21x101 has a moment of inertia Ix of 2,420 in⁴ and a section modulus Sx of 227 in³, with a plastic section modulus Zx of 253 in³. Use these with your engineer's design values — they are geometric properties, not an allowable load.
What does W21x101 mean?
The W means wide-flange. The first number is the nominal depth in inches and the second is the weight in pounds per foot — so W21x101 is a nominally 21-inch-deep wide-flange beam weighing 101 lb/ft (actual depth 21.36 in).

Related tools

Structural
Steel Beam Weight Calculator

Weigh any shape and length, with tons and cost.

Structural
Historic Steel Beam Identifier

Match a measured beam to a shape by weighted distance.

Sources & references

Estimates for planning purposes only. Verify all results against the code edition adopted in your jurisdiction and with your Authority Having Jurisdiction (AHJ). This tool is not a substitute for a licensed professional engineer. See our methodology, sources, and code editions.

Data: AISC Shapes Database v16.0, © AISC — used per its developer-use provision.