Skip to content
crewcalcs
Structural · W — wide-flange

W24x117 Steel Beam — Dimensions & Properties

W24x117 weighs 117 lb/ft and is about 24.26 in deep. Below: the full AISC section properties, a scaled cross-section, and a pre-filled weight calculator.

Weight
117lb/ft
Depth
24.26in
Width
12.8in
Area
34.4in²
Shape
W24X117 · W — wide-flange

Enter feet + inches, e.g. 20' or 18' 6".

= 20' (240″)
pcs
Cost estimate (optional)
$/lb

Optional. Prices are volatile — use your current mill/supplier rate.

Total weight
1 × W24X117
2,340lb
Per piece
2340lb
Pieces
1
Total
2340lb
Tons
1.17t
d24.26"bf 12.8"tw 0.55
ƒShow the math
  1. 1.Weight per foot (from AISC)per AISC Shapes Database v16.0

    W24X117 is a listed shape; its nominal weight is a published property.

    = 117 lb/ft
  2. 2.Length in feet
    length (in) ÷ 12
    240 ÷ 12
    = 20 ft
  3. 3.Weight per piece
    weight per foot × length
    117 × 20
    = 2340 lb
  4. 4.Total weight
    weight per piece × quantity
    2340 × 1
    = 2340 lb
  5. 5.Convert to tons
    total lb ÷ 2000
    2340 ÷ 2000
    = 1.17 tons

Section properties

Geometry
Weight
117lb/ft
Area, A
34.4in²
Depth, d
24.26in
Flange width, bf
12.8in
Flange thick, tf
0.85in
Web thick, tw
0.55in
Strong axis (x-x)
Ix
3,540in⁴
Sx
291in³
Zx
327in³
rx
10.1in
Weak axis (y-y)
Iy
297in⁴
Sy
46.5in³
Zy
71.4in³
ry
2.94in
Torsion & warping
J
6.72in⁴
Cw
40,800in⁶
Before you rely on this
  • Listed weight is the AISC theoretical (nominal) weight per foot. Actual mill weight varies within ASTM rolling tolerance, roughly ±2.5%.
  • This is bare member steel only. Add plates, stiffeners, connections, bolts, and coatings for a full erected-steel takeoff.

Similar shapes

Same series and nearest depths — compare weight and section modulus when you are sizing.

W24x55 55 lb/ftW24x62 62 lb/ftW24x68 68 lb/ftW24x76 76 lb/ftW24x84 84 lb/ftW24x94 94 lb/ftW24x104 104 lb/ftW24x131 131 lb/ftW24x146 146 lb/ftW21x122 122 lb/ft

W24x117 — questions

How much does a W24x117 weigh per foot?
A W24x117 weighs 117 lb/ft. Over a 20-foot length that is 2,340 lb (1.17 tons); a 30-foot length is 3,510 lb.
What are the dimensions of a W24x117?
W24x117 has an actual depth of 24.26 in and a flange width of 12.8 in, a flange thickness of 0.85 in, and a web thickness of 0.55 in. Cross-sectional area is 34.4 in².
What is the moment of inertia and section modulus of a W24x117?
About its strong axis, W24x117 has a moment of inertia Ix of 3,540 in⁴ and a section modulus Sx of 291 in³, with a plastic section modulus Zx of 327 in³. Use these with your engineer's design values — they are geometric properties, not an allowable load.
What does W24x117 mean?
The W means wide-flange. The first number is the nominal depth in inches and the second is the weight in pounds per foot — so W24x117 is a nominally 24-inch-deep wide-flange beam weighing 117 lb/ft (actual depth 24.26 in).

Related tools

Structural
Steel Beam Weight Calculator

Weigh any shape and length, with tons and cost.

Structural
Historic Steel Beam Identifier

Match a measured beam to a shape by weighted distance.

Sources & references

Estimates for planning purposes only. Verify all results against the code edition adopted in your jurisdiction and with your Authority Having Jurisdiction (AHJ). This tool is not a substitute for a licensed professional engineer. See our methodology, sources, and code editions.

Data: AISC Shapes Database v16.0, © AISC — used per its developer-use provision.