Skip to content
crewcalcs
Structural · W — wide-flange

W16x100 Steel Beam — Dimensions & Properties

W16x100 weighs 100 lb/ft and is about 16.97 in deep. Below: the full AISC section properties, a scaled cross-section, and a pre-filled weight calculator.

Weight
100lb/ft
Depth
16.97in
Width
10.425in
Area
29.5in²
Shape
W16X100 · W — wide-flange

Enter feet + inches, e.g. 20' or 18' 6".

= 20' (240″)
pcs
Cost estimate (optional)
$/lb

Optional. Prices are volatile — use your current mill/supplier rate.

Total weight
1 × W16X100
2,000lb
Per piece
2000lb
Pieces
1
Total
2000lb
Tons
1t
d16.97"bf 10.425"tw 0.585
ƒShow the math
  1. 1.Weight per foot (from AISC)per AISC Shapes Database v16.0

    W16X100 is a listed shape; its nominal weight is a published property.

    = 100 lb/ft
  2. 2.Length in feet
    length (in) ÷ 12
    240 ÷ 12
    = 20 ft
  3. 3.Weight per piece
    weight per foot × length
    100 × 20
    = 2000 lb
  4. 4.Total weight
    weight per piece × quantity
    2000 × 1
    = 2000 lb
  5. 5.Convert to tons
    total lb ÷ 2000
    2000 ÷ 2000
    = 1 tons

Section properties

Geometry
Weight
100lb/ft
Area, A
29.5in²
Depth, d
16.97in
Flange width, bf
10.425in
Flange thick, tf
0.985in
Web thick, tw
0.585in
Strong axis (x-x)
Ix
1,490in⁴
Sx
175in³
Zx
198in³
rx
7.1in
Weak axis (y-y)
Iy
186in⁴
Sy
35.7in³
Zy
54.9in³
ry
2.51in
Torsion & warping
J
7.73in⁴
Cw
11,900in⁶
Before you rely on this
  • Listed weight is the AISC theoretical (nominal) weight per foot. Actual mill weight varies within ASTM rolling tolerance, roughly ±2.5%.
  • This is bare member steel only. Add plates, stiffeners, connections, bolts, and coatings for a full erected-steel takeoff.

Similar shapes

Same series and nearest depths — compare weight and section modulus when you are sizing.

W16x26 26 lb/ftW16x31 31 lb/ftW16x36 36 lb/ftW16x40 40 lb/ftW16x50 50 lb/ftW16x67 67 lb/ftW16x89 89 lb/ftW18x35 35 lb/ftW18x40 40 lb/ftW18x50 50 lb/ft

W16x100 — questions

How much does a W16x100 weigh per foot?
A W16x100 weighs 100 lb/ft. Over a 20-foot length that is 2,000 lb (1 tons); a 30-foot length is 3,000 lb.
What are the dimensions of a W16x100?
W16x100 has an actual depth of 16.97 in and a flange width of 10.425 in, a flange thickness of 0.985 in, and a web thickness of 0.585 in. Cross-sectional area is 29.5 in².
What is the moment of inertia and section modulus of a W16x100?
About its strong axis, W16x100 has a moment of inertia Ix of 1,490 in⁴ and a section modulus Sx of 175 in³, with a plastic section modulus Zx of 198 in³. Use these with your engineer's design values — they are geometric properties, not an allowable load.
What does W16x100 mean?
The W means wide-flange. The first number is the nominal depth in inches and the second is the weight in pounds per foot — so W16x100 is a nominally 16-inch-deep wide-flange beam weighing 100 lb/ft (actual depth 16.97 in).

Related tools

Structural
Steel Beam Weight Calculator

Weigh any shape and length, with tons and cost.

Structural
Historic Steel Beam Identifier

Match a measured beam to a shape by weighted distance.

Sources & references

Estimates for planning purposes only. Verify all results against the code edition adopted in your jurisdiction and with your Authority Having Jurisdiction (AHJ). This tool is not a substitute for a licensed professional engineer. See our methodology, sources, and code editions.

Data: AISC Shapes Database v16.0, © AISC — used per its developer-use provision.