Skip to content
crewcalcs
Structural · W — wide-flange

W14x26 Steel Beam — Dimensions & Properties

W14x26 weighs 26 lb/ft and is about 13.91 in deep. Below: the full AISC section properties, a scaled cross-section, and a pre-filled weight calculator.

Weight
26lb/ft
Depth
13.91in
Width
5.025in
Area
7.69in²
Shape
W14X26 · W — wide-flange

Enter feet + inches, e.g. 20' or 18' 6".

= 20' (240″)
pcs
Cost estimate (optional)
$/lb

Optional. Prices are volatile — use your current mill/supplier rate.

Total weight
1 × W14X26
520lb
Per piece
520lb
Pieces
1
Total
520lb
Tons
0.26t
d13.91"bf 5.025"tw 0.255
ƒShow the math
  1. 1.Weight per foot (from AISC)per AISC Shapes Database v16.0

    W14X26 is a listed shape; its nominal weight is a published property.

    = 26 lb/ft
  2. 2.Length in feet
    length (in) ÷ 12
    240 ÷ 12
    = 20 ft
  3. 3.Weight per piece
    weight per foot × length
    26 × 20
    = 520 lb
  4. 4.Total weight
    weight per piece × quantity
    520 × 1
    = 520 lb
  5. 5.Convert to tons
    total lb ÷ 2000
    520 ÷ 2000
    = 0.26 tons

Section properties

Geometry
Weight
26lb/ft
Area, A
7.69in²
Depth, d
13.91in
Flange width, bf
5.025in
Flange thick, tf
0.42in
Web thick, tw
0.255in
Strong axis (x-x)
Ix
245in⁴
Sx
35.3in³
Zx
40.2in³
rx
5.65in
Weak axis (y-y)
Iy
8.91in⁴
Sy
3.55in³
Zy
5.54in³
ry
1.08in
Torsion & warping
J
0.358in⁴
Cw
405in⁶
Before you rely on this
  • Listed weight is the AISC theoretical (nominal) weight per foot. Actual mill weight varies within ASTM rolling tolerance, roughly ±2.5%.
  • This is bare member steel only. Add plates, stiffeners, connections, bolts, and coatings for a full erected-steel takeoff.

Similar shapes

Same series and nearest depths — compare weight and section modulus when you are sizing.

W14x22 22 lb/ftW14x30 30 lb/ftW14x43 43 lb/ftW14x53 53 lb/ftW14x68 68 lb/ftW14x90 90 lb/ftW14x120 120 lb/ftW14x145 145 lb/ftW12x136 136 lb/ftW12x106 106 lb/ft

W14x26 — questions

How much does a W14x26 weigh per foot?
A W14x26 weighs 26 lb/ft. Over a 20-foot length that is 520 lb (0.26 tons); a 30-foot length is 780 lb.
What are the dimensions of a W14x26?
W14x26 has an actual depth of 13.91 in and a flange width of 5.025 in, a flange thickness of 0.42 in, and a web thickness of 0.255 in. Cross-sectional area is 7.69 in².
What is the moment of inertia and section modulus of a W14x26?
About its strong axis, W14x26 has a moment of inertia Ix of 245 in⁴ and a section modulus Sx of 35.3 in³, with a plastic section modulus Zx of 40.2 in³. Use these with your engineer's design values — they are geometric properties, not an allowable load.
What does W14x26 mean?
The W means wide-flange. The first number is the nominal depth in inches and the second is the weight in pounds per foot — so W14x26 is a nominally 14-inch-deep wide-flange beam weighing 26 lb/ft (actual depth 13.91 in).

Related tools

Structural
Steel Beam Weight Calculator

Weigh any shape and length, with tons and cost.

Structural
Historic Steel Beam Identifier

Match a measured beam to a shape by weighted distance.

Sources & references

Estimates for planning purposes only. Verify all results against the code edition adopted in your jurisdiction and with your Authority Having Jurisdiction (AHJ). This tool is not a substitute for a licensed professional engineer. See our methodology, sources, and code editions.

Data: AISC Shapes Database v16.0, © AISC — used per its developer-use provision.