Skip to content
crewcalcs
Structural · L — angle

L6x6x1/2 Steel Angle — Dimensions & Properties

L6x6x1/2 weighs 19.6 lb/ft and is about 6 in deep. Below: the full AISC section properties, a scaled cross-section, and a pre-filled weight calculator.

Weight
19.6lb/ft
Depth
6in
Width
6in
Area
5.77in²
Shape
L6X6X1/2 · L — angle

Enter feet + inches, e.g. 20' or 18' 6".

= 20' (240″)
pcs
Cost estimate (optional)
$/lb

Optional. Prices are volatile — use your current mill/supplier rate.

Total weight
1 × L6X6X1/2
392lb
Per piece
392lb
Pieces
1
Total
392lb
Tons
0.196t
6"6"
ƒShow the math
  1. 1.Weight per foot (from AISC)per AISC Shapes Database v16.0

    L6X6X1/2 is a listed shape; its nominal weight is a published property.

    = 19.6 lb/ft
  2. 2.Length in feet
    length (in) ÷ 12
    240 ÷ 12
    = 20 ft
  3. 3.Weight per piece
    weight per foot × length
    19.6 × 20
    = 392 lb
  4. 4.Total weight
    weight per piece × quantity
    392 × 1
    = 392 lb
  5. 5.Convert to tons
    total lb ÷ 2000
    392 ÷ 2000
    = 0.196 tons

Section properties

Geometry
Weight
19.6lb/ft
Area, A
5.77in²
Depth, d
6in
Short leg, b
6in
Thickness, t
0.5in
Strong axis (x-x)
Ix
19.9in⁴
Sx
4.59in³
Zx
8.32in³
rx
1.86in
Weak axis (y-y)
Iy
19.9in⁴
Sy
4.59in³
Zy
8.32in³
ry
1.86in
Torsion & warping
rz
1.18in
Before you rely on this
  • Listed weight is the AISC theoretical (nominal) weight per foot. Actual mill weight varies within ASTM rolling tolerance, roughly ±2.5%.
  • This is bare member steel only. Add plates, stiffeners, connections, bolts, and coatings for a full erected-steel takeoff.

Similar shapes

Same series and nearest depths — compare weight and section modulus when you are sizing.

L6x6x3/8 14.9 lb/ftL6x4x3/8 12.3 lb/ftL5x5x3/8 12.3 lb/ftL4x4x1/4 6.6 lb/ftL4x4x3/8 9.8 lb/ftL4x4x1/2 12.8 lb/ftL4x3x3/8 8.5 lb/ftL8x8x1/2 26.4 lb/ft

L6x6x1/2 — questions

How much does a L6x6x1/2 weigh per foot?
A L6x6x1/2 weighs 19.6 lb/ft. Over a 20-foot length that is 392 lb (0.196 tons); a 30-foot length is 588 lb.
What are the dimensions of a L6x6x1/2?
L6x6x1/2 has an actual depth of 6 in and a short leg of 6 in, a leg thickness of 0.5 in. Cross-sectional area is 5.77 in².
What is the moment of inertia and section modulus of a L6x6x1/2?
About its strong axis, L6x6x1/2 has a moment of inertia Ix of 19.9 in⁴ and a section modulus Sx of 4.59 in³, with a plastic section modulus Zx of 8.32 in³. Use these with your engineer's design values — they are geometric properties, not an allowable load.

Related tools

Structural
Steel Beam Weight Calculator

Weigh any shape and length, with tons and cost.

Structural
Historic Steel Beam Identifier

Match a measured beam to a shape by weighted distance.

Sources & references

Estimates for planning purposes only. Verify all results against the code edition adopted in your jurisdiction and with your Authority Having Jurisdiction (AHJ). This tool is not a substitute for a licensed professional engineer. See our methodology, sources, and code editions.

Data: AISC Shapes Database v16.0, © AISC — used per its developer-use provision.