Skip to content
crewcalcs
Structural · HSS — rectangular / square

HSS6x6x1/4 Steel Tube (HSS) — Dimensions & Properties

HSS6x6x1/4 weighs 19.02 lb/ft and is about 6 in deep. Below: the full AISC section properties, a scaled cross-section, and a pre-filled weight calculator.

Weight
19.02lb/ft
Depth
6in
Width
6in
Area
5.24in²
Shape
HSS6X6X1/4 · HSS — rectangular / square

Enter feet + inches, e.g. 20' or 18' 6".

= 20' (240″)
pcs
Cost estimate (optional)
$/lb

Optional. Prices are volatile — use your current mill/supplier rate.

Total weight
1 × HSS6X6X1/4
380lb
Per piece
380.4lb
Pieces
1
Total
380.4lb
Tons
0.19t
B 6"Ht6"
ƒShow the math
  1. 1.Weight per foot (from AISC)per AISC Shapes Database v16.0

    HSS6X6X1/4 is a listed shape; its nominal weight is a published property.

    = 19.02 lb/ft
  2. 2.Length in feet
    length (in) ÷ 12
    240 ÷ 12
    = 20 ft
  3. 3.Weight per piece
    weight per foot × length
    19.02 × 20
    = 380.4 lb
  4. 4.Total weight
    weight per piece × quantity
    380.4 × 1
    = 380.4 lb
  5. 5.Convert to tons
    total lb ÷ 2000
    380.4 ÷ 2000
    = 0.19 tons

Section properties

Geometry
Weight
19.02lb/ft
Area, A
5.24in²
Depth, Ht
6in
Width, B
6in
Design wall, t
0.233in
Strong axis (x-x)
Ix
28.6in⁴
Sx
9.54in³
Zx
11.2in³
rx
2.34in
Weak axis (y-y)
Iy
28.6in⁴
Sy
9.54in³
Zy
11.2in³
ry
2.34in
Torsion & warping
J
46.5in⁴
Before you rely on this
  • Listed weight is the AISC theoretical (nominal) weight per foot. Actual mill weight varies within ASTM rolling tolerance, roughly ±2.5%.
  • This is bare member steel only. Add plates, stiffeners, connections, bolts, and coatings for a full erected-steel takeoff.

Similar shapes

Same series and nearest depths — compare weight and section modulus when you are sizing.

HSS6x6x3/8 27.48 lb/ftHSS6x6x1/2 35.24 lb/ftHSS6x4x1/4 15.62 lb/ftHSS5x5x1/4 15.62 lb/ftHSS5x5x3/8 22.37 lb/ftHSS4x4x1/4 12.21 lb/ftHSS4x4x3/8 17.27 lb/ftHSS8x8x1/4 25.82 lb/ftHSS8x8x3/8 37.69 lb/ft

HSS6x6x1/4 — questions

How much does a HSS6x6x1/4 weigh per foot?
A HSS6x6x1/4 weighs 19.02 lb/ft. Over a 20-foot length that is 380 lb (0.19 tons); a 30-foot length is 571 lb.
What are the dimensions of a HSS6x6x1/4?
HSS6x6x1/4 is 6 in deep by 6 in wide with a 0.233 in design wall thickness (nominal 0.25 in), and a cross-sectional area of 5.24 in².
What is the moment of inertia and section modulus of a HSS6x6x1/4?
About its strong axis, HSS6x6x1/4 has a moment of inertia Ix of 28.6 in⁴ and a section modulus Sx of 9.54 in³, with a plastic section modulus Zx of 11.2 in³. Use these with your engineer's design values — they are geometric properties, not an allowable load.

Related tools

Structural
Steel Beam Weight Calculator

Weigh any shape and length, with tons and cost.

Structural
Historic Steel Beam Identifier

Match a measured beam to a shape by weighted distance.

Sources & references

Estimates for planning purposes only. Verify all results against the code edition adopted in your jurisdiction and with your Authority Having Jurisdiction (AHJ). This tool is not a substitute for a licensed professional engineer. See our methodology, sources, and code editions.

Data: AISC Shapes Database v16.0, © AISC — used per its developer-use provision.